Response Times - Mitsubishi FX2NC DSS Series Hardware Manual

FX2NC Series Programmable Controllers
6.1.1

Response times

OFF times increase as the load current decreases.
For improved response times use a 'dummy' resistor, see Figure 6.1. If a response time of 0.5
ms or better is required when using 'light loads' use a 'dummy' resistor and ensure the signal
line has a current greater than 60mA/24V DC.
Figure 6.1 :Dummy load
Y
Load
+Y
Source
Dummy
load
5 to 30V DC
Outputs 6.
6-2