Edit Wan Connection - ZyXEL Communications EMG2881-T20A User Manual

The following table describes the labels in this screen.
Table 9 Configuration > WAN > Management WAN
LABEL
#
Name
Interface
Type
VLAN ID
IP Address
Status
Modify

6.4.1 Edit WAN Connection

Click the Edit icon next to the connection you want to configure. Use this screen to configure a WAN
connection. The screen varies depending on the encapsulation you select.
6.4.1.1 IPoE Encapsulation
This screen displays when you select IPoE encapsulation.
Chapter 6 WAN
DESCRIPTION
This is the index number of the connection.
This is the service name of the connection.
This is the interface of the connection.
This shows the type of interface used by this connection.
This indicates the VLAN ID number assigned to traffic sent through this connection.
This is the WAN IP address used by this connection.
This shows the status of the connection.
Click the Edit icon to configure the connection.
Click the Delete icon to delete this connection from the EMG2881-T20A. A window displays
asking you to confirm that you want to delete the connection.
EMG2881-T20A User's Guide
40