Hardware; Front Panel; Front Panel Leds (Lights) - ZyXEL Communications EMG2881-T20A User Manual

1.5 Hardware

1.5.1 Front Panel

The following graphic displays the front panel of the EMG2881-T20A.
Figure 3 LEDs on the EMG2881-T20A

1.5.2 Front Panel LEDs (Lights)

The following table describes the front panel LEDs.
Table 1 Front panel LEDs
LED
Power
Internet
WLAN 2.4/5G
Chapter 1 Introduction
COLOR STATUS DESCRIPTION
White On The EMG2881-T20A is receiving power and functioning properly.
Off The EMG2881-T20A is not receiving power.
White On The EMG2881-T20A has an IP connection but no traffic.
Your device has a WAN IP address (either static or assigned by a DHCP
server), PPP negotiation was successfully completed (if used) and the
connection is up.
Blinking The EMG2881-T20A is sending or receiving IP traffic.
Off The EMG2881-T20A does not have an IP connection.
White On The 2.4 GHz/5 GHz wireless network is activated.
Blinking The EMG2881-T20A is communicating with 2.4 GHz/5 GHz wireless clients.
Amber Blinking The EMG2881-T20A is setting up a WPS connection with a 2.4 GHz/5 GHz
wireless client.
Off The wireless LAN is not ready or has failed.
EMG2881-T20A User's Guide
12