Table of Contents
Advertisement
The following figure shows you an example to set up wireless network and security by pressing a button
on both EMG2881-T20A and wireless client (the Android 4.4.2 phone in this example).
Figure 9 Example WPS Process: PBC Method
Wireless Client
4.2.2 PIN Configuration
When you use the PIN configuration method, you need to check the client's PIN number and use the
EMG2881-T20A's configuration interface.
Go to your phone settings and turn on Wi-Fi. Open the Wi-Fi networks list and tap WPS PIN Entry to get a
1
PIN number.
Enter the client's PIN number to the PIN field in the Configuration > Wireless > WPS screen on the
2
EMG2881-T20A.
Click the Start button (or button next to the PIN field) on the EMG2881-T20A's WPS screen within two
3
minutes.
The EMG2881-T20A authenticates the wireless client and sends the proper configuration settings to the
wireless client. This may take up to two minutes. Then the wireless client is able to communicate with the
EMG2881-T20A securely.
The following figure shows you the example to set up wireless network and security on EMG2881-T20A
and wireless client (Android 4.4.2 smartphone in this example) by using PIN method.
Chapter 4 Tutorials
WITHIN 2 MINUTES
SECURITY INFO
COMMUNICATION
EMG2881-T20A User's Guide
25
EMG
WPS
Press and hold for
more than 1 second
Advertisement
Table of Contents
