Output Zone - Overview - QSC MP-M80 User Manual

Output Zone − Overview
The output overview provides an aggregated, "at a glance"
view of channel settings. Most of the controls are present
on other processing blocks and will be described in detail
in the sections covering their respective functions.
1. Overview button – Touch to select the Overview
screen.
2. Preset button – Displays the name of the currently
loaded output channel preset. Touch to open the
Preset screen.
3. Reset button – Returns the Zone output channel to
factory default setting.
4. Sources – Displays the names of the sources selected
from the Presets screen.
a. Primary display button – Touch to change the
primary source
b. Secondary display button – Touch to change the
secondary source
c. Active display button – Touch to change the
active source
5. Anti-Feedback In switch – Engages / disengages the
anti-feedback fi lters.
6. Stereo Link display button – Indicates if the output is linked to the adjacent channel. Touch to toggle Stereo Link on and off.
7. Tuning display button – Displays the name of the currently loaded loudspeaker tuning. Touch to select a different tuning.
8. Min / Max Output –
a. Readout controls – Displays the current setting. Touch the readout and use the Nudge controls to adjust.
b. Sliders – Adjust the minimum and maximum output level for the output. Touch and drag to adjust.
9. Loudness –
a. In switch – Engages / disengages Loudness compensation and
b. Slider – adjusts the Threshold.
10. Delay –
a. Knob – Adjusts the output delay
b. Button – Enables / disables the output Delay
11. NEQ –
a. In switch – Engages / disengages the GEQ.
b. Sliders – Displays and allows adjustment of the settings for the output's graphic equalizer.
12. Limiter –
a. In switch – Engages / disengages the Limiter
b. Graph – Displays the settings for the limiter.
c. Threshold readout control – Touch to select; use the Nudge controls to adjust
d. Attack readout control – Touch to select; use the Nudge controls to adjust
e. Release readout control – Touch to select; use the Nudge controls to adjust
TD-001578-01-A
Outputs
1
4a 4b 4c
6
7
8a
8b
11a
10a
11b
10b
26
Touch a Channel
Touch Zones
Overview Button
Zones
2 3
5
9a
9b
12a
12b
12c 12d 12e