Mp Install; Control Panel - QSC MP-M80 User Manual

MP Install

MP Install is an app that runs on iOS, Android and Windows. It is intended for use by system designers and installers. See the Network section of
this document for instructions on logging in to a new MP-M for the fi rst time.

Control Panel

The Control Panel (right side of screen) provides navigation
to all mixer controls, indicators and functions.
Navigational Controls
1. Inputs – Opens a screen that displays icons
representing the controls and processing blocks for
input channels.
2. Outputs – Opens a screen that displays the icons
representing the controls and processing blocks for
output channels.
3. Mixer – Opens the MP-M built-in mixer screen.
4. Setup izard – Opens a screen that provides a
checklist of setup tasks and links to areas of the mixer
where the tasks are performed.
5. Menu – Opens a screen providing access to the setup
functions for the system.
Operational Controls
6. Cue Level button – Opens the Cue Level pop-up.
7. Copy and Paste buttons – The MP-M has a powerful
but simple copy and paste function. Copy and Paste is
context sensitive so what you are looking at is what will
be copied. Only "like" things can be copied and pasted
from and to each other. For example, a PEQ cannot
be pasted to a GEQ. Some screens cannot be copied,
for example the Inputs Home screen. In these cases a
dialog displays saying "Copy not available here".
8. Prev & Next buttons – Navigate to the next
or previous channel.
9. Nudge up & down
decreases the value setting of the selected control.
10. Zero button – Returns the selected control to its
factory default value.
11. Fine button – Decreases the amount of change
that will be applied by the Nudge buttons.
12. Cue Level fader – Touch and drag to adjust the level of
audio from the Cue output jack.
13. Cue Level Close button – Touch to close the Cue fader
pop-up.
TD-001578-01-A
6
7
buttons – Increases or
8
9
10
1
2
3
4
5
11
4
12
13