Error - FujiFilm Frontier DE100 Operation Manual

When an Error Occurs

7.1.2.3 Error

Error ID
E-012E Detected plate heater assembly abnormality.
Operate unit within published temperature specifications (10 °C to 35 °C) and restart the printer.
E-012F Detected plate heater assembly abnormality.
Operate unit within published temperature specifications (10 °C to 35 °C) and restart the printer.
E-0130 Detected hot air heater assembly abnormality.
Restart the printer.
E-013C Detected hot air heater assembly abnormality.
Operate unit within published temperature specifications (10 °C to 35 °C) and restart the printer.
E-013D Detected hot air heater assembly abnormality.
Operate unit within published temperature specifications (10 °C to 35 °C) and restart the printer.
E-0140 Detected plate heater assembly abnormality.
Restart the printer.
E-0142 Detected plate heater assembly abnormality.
Operate unit within published temperature specifications (10 °C to 35 °C) and restart the printer.
E-0144 Detected hot air heater assembly abnormality.
Restart the printer.
E-0146 Detected hot air heater assembly abnormality.
Operate unit within published temperature specifications (10 °C to 35 °C) and restart the printer.
E-0152 Temperature is outside operating range (low temperature).
Operate unit within published temperature specifications (10 °C to 35 °C) and restart the printer.
E-0153 Temperature is outside operating range (high temperature).
Operate unit within published temperature specifications (10 °C to 35 °C) and restart the printer.
E-0205 Reached the carriage assembly replacing time.
Contact service support.
E-0238 Detected PF motor abnormality.
Restart the printer.
E-0239 Detected roll motor abnormality.
Restart the printer.
E-0248 Detected PF motor abnormality.
Restart the printer.
E-030C Reached the waste ink bottle replacing time.
Contact service support.
E-030E Reached the waste ink tank replacing time.
Contact service support.
E-0310 Reached the flushing box replacing time.
Contact service support.
E-0325 Detected MC board abnormality.
Turn off the printer and disconnect/reconnect the printer power cable, and then restart the printer.
E-0326 Detected MC board abnormality.
Turn off the printer and disconnect/reconnect the printer power cable, and then restart the printer.
E-0329 Detected MC board firmware abnormality.
Turn off the printer and disconnect/reconnect the printer power cable, and then restart the printer and PC.
Execute Firmware Update from the maintenance tool.
E-032A Detected MC board abnormality.
Turn off the printer and disconnect/reconnect the printer power cable, and then restart the printer and PC.
E-032B Detected MC board abnormality.
Turn off the printer and disconnect/reconnect the printer power cable, and then restart the printer and PC.
E-0331 Detected platen vacuum fan abnormality.
Restart the printer.
7-8
Message
- Frontier DE100 Operation Guide -