Error Messages (In Alphabetical Order); Messages About Consumables - FujiFilm Xerox Phaser 6270 User Manual

6.6

Error Messages (in Alphabetical Order)

This section describes the messages displayed on the control panel.

Messages About Consumables

Message
010-317
Install Fuser
093-NNN
Check XXX Cartridge
XXX=Yellow, Magenta, Cyan, or
Black
093-NNN
XXX Cartridge Error
XXX=Yellow, Magenta, Cyan, or
Black
094-320
Belt Unit Error
010-359
Fuser Unit Error
Install XXX
Print Cartridge
XXX=Yellow, Magenta, Cyan, or
Black
Install
Belt Unit
010-351
Replace Fuser
Ready to print
XXX Low
Ready to print
Keep Printing
XXX=Yellow, Magenta, Cyan, or
Black
96
6 Troubleshooting
The fuser unit is not installed. Install the fuser unit.
Refer to
• "Replacing the Fuser" (P. 109)
Sealing tape is still attached to the XXX print cartridge. Remove the sealing tape
from the displayed print cartridge.
The XXX print cartridge is not installed correctly or is not working correctly due to
damage or malfunction. Reinstall the print cartridge.
Refer to
• "Replacing the Print Cartridges" (P. 106)
The belt unit is not installed correctly or is not working correctly due to damage or
malfunction. Reinstall the belt unit.
Refer to
• "Replacing the Belt Unit" (P. 115)
The fuser unit is not installed correctly or is not working correctly due to damage or
malfunction. Reinstall the fuser unit.
Refer to
• "Replacing the Fuser" (P. 109)
The XXX print cartridge is not installed. Install the XXX print cartridge.
Refer to
• "Replacing the Print Cartridges" (P. 106)
The belt unit is not installed. Install the belt unit.
Refer to
• "Replacing the Belt Unit" (P. 115)
Time to replace the fuser unit. Replace the old fuser unit and the old feed roller with a
new one.
Refer to
• "Replacing the Fuser" (P. 109)
• "Replacing the Feed Roller" (P. 111)
The XXX print cartridge is nearly empty. Purchase a new print cartridge.
Refer to
• "Replacing the Print Cartridges" (P. 106)
Condition/Reason/Action