FujiFilm Frontier-S DX 100 Manual
Performing an initial ink charge
Hide thumbs
Also See for Frontier-S DX 100:
- Service manual (303 pages) ,
- Field maintenance manual (25 pages) ,
- Installation manual (25 pages)
Advertisement
Quick Links
Read Me First
Performing an Initial Ink Charge
Important: Please read through these instructions before attempting to install your new
DX100.
Place the new printer in place and open the
ink bay doors.
Insert the Ink Cartridges
Remove the Maintenance Cartridge from
the printer, then re-insert. This ensures the
cartridge is properly installed in the event it
has become dislodged during shipping.
Maintenance Cartridge
Do not load paper at this time.
Ink Cartridges
1 1
Advertisement
Related Manuals for FujiFilm Frontier-S DX 100
Summary of Contents for FujiFilm Frontier-S DX 100
-
Page 1: Read Me First
Read Me First Performing an Initial Ink Charge Important: Please read through these instructions before attempting to install your new DX100. Place the new printer in place and open the ink bay doors. Insert the Ink Cartridges Remove the Maintenance Cartridge from the printer, then re-insert. - Page 2 Be sure the printer power button is off by making sure it is not pushed in. Plug in the power cable on the right hand side of the printer. Do not plug in the USB cable at this time. Press the power button on the printer to allow the printer to charge the ink system.