Delta HPH-20KA01KAT User Manual page 39

Delta Electronics. Inc.
Bus OVP
GND Detect
Set Point Monitor
Energy Mode Monitor
Parallel Fault IP1
Parallel Fault IP2
Parallel Fault IP3
Parallel Fault IP4
Parallel Fault IP5
Parallel Fault IP6
Parallel Fault IP7
Parallel Fault IP8
Parallel Fault IP9
Parallel Fault IP10
Parallel Fault IP11
Parallel Fault IP12
Parallel Fault IP13
21 Input voltage is over operation range
Positive output is not connected to
22
protective earth
Error while output fails to reach
23
setting parameter within setting time
Power off while output reaches
24
setting Energy
101 Fault from PSU IP 01
102 Fault from PSU IP 02
103 Fault from PSU IP 03
104 Fault from PSU IP 04
105 Fault from PSU IP 05
106 Fault from PSU IP 06
107 Fault from PSU IP 07
108 Fault from PSU IP 08
109 Fault from PSU IP 09
110 Fault from PSU IP 10
111 Fault from PSU IP 11
112 Fault from PSU IP 12
113 Fault from PSU IP 13
HPH- 20KA01KAT
Take all safety precaution, and
then check if the mains voltage
that is in specification.
Check if the output positive
terminal is short to protective
earth.
Take all safety precaution, and
then turn on the output power
with a dummy load to ensure if
it is under normal operation.
Monitor Setting is end. Press
and hold "OFF" button with 10
second to clear error.
Check the PSU with IP 01
independently to ensure the
operation is normal.
Check the PSU with IP 02
independently to ensure the
operation is normal.
Check the PSU with IP 03
independently to ensure the
operation is normal.
Check the PSU with IP 04
independently to ensure the
operation is normal.
Check the PSU with IP 05
independently to ensure the
operation is normal.
Check the PSU with IP 06
independently to ensure the
operation is normal.
Check the PSU with IP 07
independently to ensure the
operation is normal.
Check the PSU with IP 08
independently to ensure the
operation is normal.
Check the PSU with IP 09
independently to ensure the
operation is normal.
Check the PSU with IP 10
independently to ensure the
operation is normal.
Check the PSU with IP 11
independently to ensure the
operation is normal.
Check the PSU with IP 12
independently to ensure the
operation is normal.
Check the PSU with IP 13
independently to ensure the
operation is normal.
35