Delta Electronics. Inc.
Note:We recommend you use a ground wire that can conduct the current of one
phase( for example, 40A for HPH-20KA01KAT) that is no longer than 3 feet. We
recommend you connect the ground stud on the master unit to system ground. See
Figure 5.3 for more information.
Continue connecting togeter subsequent slave unit chassis as done in the previous
4.
step.
Set the front panel => Interface Setup => Prallel Mode Setup => Slave
5.
Figure 5.3 Configuration for HPH-20KA01KAT A master/slave system
5.7. Monitoring Your Master/Slave System
HPH- 20KA01KAT
21