Table of Contents
Advertisement
Electrical Requirements
Compressor Type
Maximum Air Pressure
Air Delivery
Air Tank Capacity
Female Air Outlet Size
Automatic
Turn-On/Shut-Off
Pressure
Additional Features
Overall Dimensions
Net Weight
When unpacking, check to make sure that the item is intact and undamaged. if
any parts are missing or broken, please call Harbor Freight Tools at the number shown
on the cover of this manual as soon as possible.
Read the ENtIRE IMPORtANt SAFEtY INFORMAtION section at the
beginning of this manual including all text under subheadings therein
before set up or use of this product.
WARNING
WARNING
Note: For additional information regarding the parts listed in the following pages, refer
to the Assembly Diagram near the end of this manual.
1.
CAutION! Always make sure the Air Compressor's Power Switch (2) is in its
"OFF" position prior to performing any service, maintenance, or cleaning of the
Compressor.
SKU 96496
For technical questions, please call 1-800-444-3353.
SPECIFICAtIONS
120 V~ / 60 Hz / 13 Amps (Running)
4 HP Motor (Peak) / 100 Watts (Running) / 13000 Motor RPM
Motor Thermal Protection Shut-Off: 266 Degrees Fahrenheit
Thermal Protection Reset: Present (1 Amp Circuit Breaker Used)
Power Cord: 16 AWG x 3C / 6' Long
Power Plug: 3-Prong / Grounded
Oilless for Maintenance Free Operation
1 PSi
4.0 SCFM @ 90 PSi / 6.0 SCFM @ 40 PSi
26 Gallons
1/4"-1 NPT
12 PSi Automatic Turn-On
1 PSi Automatic Shut-Off (+ or - PSi)
Two 7-3/4" Diameter x 1-3/4" Tires
Built-in Tool Storage Compartment
43-7/" H x 17-3/4" W x 21-1/4" L (Up to Handle)
6 Pounds
uNPACKING
SEt uP INStRuCtIONS
Risk of accidental starting; resulting in serious personal
injury. turn the Power Switch of the tool to its "OFF"
position and unplug the tool from its electrical outlet before
assembling or making any adjustments to the tool.
Assembly
Page
Advertisement
Table of Contents
