Table of Contents
Advertisement
2.
CAutION: Your Warranty is voided if you drop the Air Compressor. Always
transport the Air Compressor using its Handle and Wheels.
3.
dANGER! This Air Compressor is NOT equipped and should not be used "as-is"
to supply breathing air. For any application of air for human consumption, you
must fit the Air Compressor with suitable in-line safety and alarm equipment (not
included). This additional equipment is necessary to properly filter and purify
the air to meet minimal specifications for Grade D breathing as described in
Compressed Gas Association Commodity Specification G 7.1-1966, OSHA 29
CFR 1910. 134, and/or Canadian Standards Associations (CSA). in the event
the Air Compressor is used for the purpose of breathing air application and
proper in-line safety and alarm equipment is not simultaneously used, existing
warranties are void, and Harbor Freight Tools disclaims any liability whatsoever
for any loss, personal injury, or damage.
4.
dANGER! Never attempt to repair or modify the Air Tank (29). Welding, drilling,
or any other modification will weaken the Tank resulting in damage from rupture
or explosion. Always replace worn, cracked, or damaged Tanks.
.
WARNING! Never use plastic (PVC) pipe for compressed air; serious injury or
death could result. Any tube, pipe, or hose used must have a pressure rating
higher than 1 PSi. Minimum recommended pipe size: Up to 0 feet long use
1/2" diameter. Greater than 50 feet use 3/4" diameter. Larger diameter pipe is
always better.
6.
CAutION: DO NOT use an extension cord with this product.
7.
Make sure all tools and equipment used with the Air Compressor are rated to the
appropriate capacity. Do not use any tool or equipment that operates over 155
PSi.
.
Drain the Air Compressor every day. Do not allow excessive moisture to build up
inside the Air Compressor's Tank. Do not open the Drain Valve (33) with more
than 10 PSi of air pressure in the Tank. Do not unscrew the Drain Valve so that
more than four turns are showing.
9.
Avoid injury. Never direct the Air Outlet Valve (26) at people or animals.
10.
Do not alter or remove the Safety Release Valve (20).
11.
Make sure the Air Compressor is located on a flat, level, sturdy surface capable
of supporting the weight of the Compressor, operator(s), and any additional tools
and equipment.
12.
Do not move or transport the Compressor if the Air Tank (29) is under pressure.
13.
industrial applications must follow OSHA guidelines.
SKU 96496
For technical questions, please call 1-800-444-3353.
Page
Advertisement
Table of Contents
