Setup; Specifications - Central Pneumatic 93657 Owner's Manual & Safety Instructions

Specifications

Electrical Rating
Motor
Power Cord
Thermal Protection
Maximum Air Pressure
/ Automatic Shut Off
Automatic Restart
Air Output
Air Outlet Size
Hose Dimensions
Base Dimensions
Setup - Before use:
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
TO PREVENT SERIOUS INJURY
FROM ACCIDENTAL OPERATION:
Turn the Power Switch "OFF" and unplug
the Air Compressor from its electrical
outlet before assembling or making any
adjustments to the compressor.
Note: For additional information regarding the
parts listed in the following pages, refer to the
Assembly Diagram near the end of this manual.
Before operating, make sure the Air
Compressor is set up in a well-ventilated
area, on a flat, level, solid surface well away
from any flammable objects, such as drapes.
Never paint in an area without proper ventilation,
or near possible ignition sources.
Page 6
120VAC / 60Hz / 2A
1,750 RPM
6' Long Power Cord (18AWG x 3C)
Automatic shut-off on overload/overheat and automatic reset
58 PSI
43 PSI
.5 CFM @ 20 PSI
1/8"-28 NPS Air Outlet with 1/4"-18 NPT Male Adapter
.236" OD x .157" ID x 10' Long (1/8"-28 NPS Female Adapter - both sides)
7-3/8" L x 5-3/8" W x 1" H
For technical questions, please call 1-888-866-5797.
Pressure
Regulator (40)
Pressure
Gauge (11)
Water Drain
Valve (41)
Air Hose (43)
Figure A: Functions
Handle
(30)
Power
Switch
(34)
Item 93657