Advertisement
ITEM
Maximum Pressure 115 PSI with auto shut off
CFM
Tank Capacity
Power Consumption
Motor
Air Outlet
Power Cord
Features
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
WARNING: When using tool, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1.
Keep work area clean. Cluttered areas invite injuries.
2.
Observe work area conditions. Do not use machines or power tools in damp or wet
locations. Don't expose to rain. Keep work area well lighted. Do not use electrically
powered tools in the presence of flammable gases or liquids.
3.
Keep children away. Children must never be allowed in the work area. Do not let
them handle machines, tools, or extension cords.
4.
Store idle equipment. When not in use, tools must be stored in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children.
5.
Do not force tool. It will do the job better and more safely at the rate for which it was
intended. Do not use inappropriate attachments in an attempt to exceed the tool
capacity.
SKU 46168
Specifications
2.6 CFM @ 115 PSI; 3.0 @ 90 PSI;
3.4 CFM @ 70 PSI; 4.0 CFM @ 40 PSI
12 Gallons
120 VAC, 60 Hz, single phase; 9.7 amps (no load),
20.2 amps (startup)
3 HP , 1750 RPM
1/4 inch, NPT (Male)
6-foot, 14 AWG, 3-wire, 3-prong plug; U.L. approved
- tank drain valve and air outlet
- thermal overload protection
- 0~200 PSI Air Pressure Gauge, 1/4"
- rear pneumatic tires, 8" (dia.)
- Clear view oil change window
Save This Manual
Safety Warnings and Precautions
Page 2
DESCRIPTION
Advertisement
