Memory - Foxconn WinFast 6150K8M Series User Manual

Memory

This motherboard includes four 184-pin slots with 266/333/400 MHz Dual Chan-
nel DDR DRAM interface, You must install at least one memory module to
ensure normal operation. If you install more than two modules, they must be
the same speed. Mixing memory modules from different manufactures are not
recommended.
For the latest memory modules support list, please visit the website:
http://www.foxconnchannel.com
Installation of DDR Memory
1. There is only one gap in the center of the DIMM slot, and the memory module
can be fixed in one direction only.
2. Align the memory module to the DIMM slot, and insert the module
vertically into the DIMM slot.
3. The plastic clips at both sides of the DIMM slot will lock automatically.
Note:
Be sure to unplug the AC power supply before adding or re-
moving expansion cards or other system peripherals, espe-
cially the memory devices, otherwise your motherboard or the
system memory might be seriously damaged.
12
Chapter 2 Installation Instructions
104 Pins 80 Pins
DIMM1
DIMM2
DIMM3
DIMM4