vSecurity Option
When it is set to "Setup", a password is required to enter the CMOS
Setup screen; When it is set to "System", a password is required not q
only to enter CMOS Setup, but also to start up your PC.
vAPIC Mode
This option is used to enable or disable APIC mode.
vMPS Version Control For OS
This option is used to set up the version of MPS Table used in NT4.0 OS.
vOS Select For DRAM > 64MB
This option is only required if you have installed more than 64 MB of memory
and you are running the OS/2 operating system. Otherwise, leave this option
at the default.
vFull Screen LOGO Show
This option allows you to enable or disable the full screen logo.
vSmall Logo (EPA) Show
This option allows you to enable or disable the EPA logo.
34
Chapter 3 BIOS Description