Advertisement
Item
Electrical Requirements
Power Switch With Lock Button
Belt Speed
Sanding Belt Size
Sanding Belt Type
Sanding Base Size
Overall Dimensions
Weight
You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures, parts list and as-
sembly diagram. Keep your invoice with this manual. Write the invoice number
on the inside of the front cover. Keep this manual and invoice in a safe and dry
place for future reference.
GENERAL SAFETY WARNINGS AND PRECAUTIONS
1.
KEEP WORK AREA CLEAN AND DRY. Cluttered, damp, or wet work areas
invite injuries.
2.
KEEP CHILDREN AWAY FROM WORK AREA. Do not allow children to handle
this product.
3.
STORE IDLE EQUIPMENT. When not in use, tools and equipment should be
stored in a dry location to inhibit rust. Always lock up tools and equipment, and
keep out of reach of children.
4.
DO NOT USE THIS PRODUCT IF UNDER THE INFLUENCE OF ALCOHOL OR
DRUGS. Read warning labels on prescriptions to determine if your judgement or
reflexes are impaired while taking drugs. If there is any doubt, do not attempt to
use this product.
5.
USE EYE AND BREATHING PROTECTION. Wear ANSI approved safety impact
eye goggles and a NIOSH (National Institute for Occupational Safety and Health)
approved respirator. ANSI approved safety impact eye goggles, dust masks, and
respirators are available from Harbor Freight Tools.
SKU 40118
PRODUCT SPECIFICATIONS
110 V / 6 Amp / Double Insulated Motor
Yes
656 Feet Per Minute
3” Wide 18” Diameter
100 Grit
3-3/8” Wide 5-3/8” Long
5-1/2” Wide 6-7/8” Long
6.85 Pounds
SAVE THIS MANUAL
PAGE 2
Description
Advertisement
