Table of Contents
Advertisement
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
REV 14g
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2012 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Advertisement
Table of Contents
Related Manuals for Chicago Electric 69924
Summary of Contents for Chicago Electric 69924
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: Table Of Contents
2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. Page 2 For technical questions, please call 1-888-866-5797. Item 69924... -
Page 3: Electrical Safety
A wrench or a key left attached to a rotating part of the power tool may result in personal injury. Item 69924 For technical questions, please call 1-888-866-5797. Page 3... -
Page 4: Power Tool Use And Care
Incorrectly sized accessories workpiece fragments. The eye protection must cannot be adequately guarded or controlled. be capable of stopping flying debris generated by various operations. The eye protection must Page 4 For technical questions, please call 1-888-866-5797. Item 69924... - Page 5 19. Do not leave the tool unattended when it is plugged but must be supplied by the operator. into an electrical outlet. Turn off the tool, and unplug it from its electrical outlet before leaving. Item 69924 For technical questions, please call 1-888-866-5797. Page 5...
-
Page 6: Vibration Safety
7. To reduce vibration, maintain the tool as tingling, numbness, and white or blue fingers), explained in this manual. If any abnormal seek medical advice as soon as possible. vibration occurs, stop use immediately. SAVE THESE INSTRUCTIONS. Page 6 For technical questions, please call 1-888-866-5797. Item 69924... - Page 7 National Electrical Code. 2. Double insulated tools may be used in either of the 120 volt outlets shown in the preceding illustration. (See Outlets for 2-Prong Plug.) Outlets for 2-Prong Plug Item 69924 For technical questions, please call 1-888-866-5797. Page 7...
-
Page 8: Extension Cords
Do not cover ventilation ducts. Keep flammable objects away. WARNING marking concerning Amperes Risk of Electric Shock. Properly connect power cord to appropriate outlet. n 0 xxxx/min. No Load Revolutions per Minute (RPM) Page 8 For technical questions, please call 1-888-866-5797. Item 69924... -
Page 9: Specifications
Gear Housing. Side Handle into the selected position. Tighten securely before beginning work. Functions Side Handle (30) Speed Control (20) Pad Connector (46) Switch (21) hidden under Shroud Backing Pad (47) Item 69924 For technical questions, please call 1-888-866-5797. Page 9... -
Page 10: Operation
The power cord must but not limited to, ANSI-approved eye and hearing reach the work area with enough extra length protection, as well as heavy-duty work gloves. to allow free movement while working. Page 10 For technical questions, please call 1-888-866-5797. Item 69924... - Page 11 Apply the wax to all flat surfaces with broad, 16. Clean, then store the tool indoors sweeping strokes in a crisscross pattern. out of children’s reach. Apply the wax evenly over the surface of the vehicle. Item 69924 For technical questions, please call 1-888-866-5797. Page 11...
-
Page 12: Maintenance
WARNING! If the supply cord of this • any other condition that may power tool is damaged, it must be replaced affect its safe operation. only by a qualified service technician. Page 12 For technical questions, please call 1-888-866-5797. Item 69924... -
Page 13: Troubleshooting
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Item 69924 For technical questions, please call 1-888-866-5797. Page 13... -
Page 14: Parts List And Diagram
Shroud Screw Housing Eccentric Wheel Carbon Brush Eccentric Plate Carbon Brush Holder Eccentric Plate Screw Speed Control Bearing Retaining Ring Switch Bearing Spring Pad Connector Internal Switch Backing Pad Clamp Screw Page 14 For technical questions, please call 1-888-866-5797. Item 69924... -
Page 15: Assembly Diagram
Assembly Diagram Item 69924 For technical questions, please call 1-888-866-5797. Page 15... -
Page 16: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.