2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. Page 2 For technical questions, please call 1-800-444-3353. Item 69924...
A wrench or a key left attached to a rotating part of the power tool may result in personal injury. Item 69924 For technical questions, please call 1-800-444-3353. Page 3...
Incorrectly sized accessories workpiece fragments. The eye protection must cannot be adequately guarded or controlled. be capable of stopping flying debris generated by various operations. The eye protection must Page 4 For technical questions, please call 1-800-444-3353. Item 69924...
Page 5
(California Health & Safety Code § 25249.5, et seq.) These carry important safety information. If unreadable or missing, contact 25. The warnings, precautions, and instructions Harbor Freight Tools for a replacement. discussed in this instruction manual cannot cover all possible conditions and situations 18. Avoid unintentional starting.
7. To reduce vibration, maintain the tool as tingling, numbness, and white or blue fingers), explained in this manual. If any abnormal seek medical advice as soon as possible. vibration occurs, stop use immediately. SAVE THESE INSTRUCTIONS. Page 6 For technical questions, please call 1-800-444-3353. Item 69924...
Page 7
National Electrical Code. 2. Double insulated tools may be used in either of the 120 volt outlets shown in the preceding illustration. (See Outlets for 2-Prong Plug.) Outlets for 2-Prong Plug Item 69924 For technical questions, please call 1-800-444-3353. Page 7...
Do not cover ventilation ducts. Keep flammable objects away. WARNING marking concerning Amperes Risk of Electric Shock. Properly connect power cord n 0 xxxx/min. to appropriate outlet. No Load Revolutions per Minute (RPM) Page 8 For technical questions, please call 1-800-444-3353. Item 69924...
Gear Housing. Side Handle into the selected position. Tighten securely before beginning work. Functions Side Handle (30) Speed Control (20) Pad Connector (46) Switch (21) hidden under Shroud Backing Pad (47) Item 69924 For technical questions, please call 1-800-444-3353. Page 9...
The power cord must but not limited to, ANSI-approved eye and hearing reach the work area with enough extra length protection, as well as heavy-duty work gloves. to allow free movement while working. Page 10 For technical questions, please call 1-800-444-3353. Item 69924...
Page 11
NOTICE: Only use slower speeds for polishing. Otherwise, damage may occur to the paint Note: The most common error when waxing/polishing being polished. Harbor Freight Tools is not a vehicle is applying too much wax. If the Foam responsible for damage to the vehicle’s Pad becomes saturated with wax, applying wax will finish due to improper use of this tool.
WARNING! If the supply cord of this • any other condition that may power tool is damaged, it must be replaced affect its safe operation. only by a qualified service technician. Page 12 For technical questions, please call 1-800-444-3353. Item 69924...
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Item 69924 For technical questions, please call 1-800-444-3353. Page 13...
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.