Option Settings And Print Settings - Sharp UX-B800SE Operation Manual

7. Option Settings and Print Settings

The option settings and print settings
allow you to customize the operation of
the machine to better suit your needs.
The option settings are related to
general operation. The print settings are
related to printing.
The option settings and print settings
have been initially configured at the
factory. To change a setting, follow the
steps below to display the desired
setting, and then change the setting as
explained in the tables that follow.
FUNCTION
1
Press , then
[OPTION SETTING] or [PRINT SET-
UP] .
appears
Option Settings
Make a selection for the displayed setting as explained below.
This is done in step 3 of the above procedure.
Setting
FINE PRIORITY This is used to change the default resolution for faxing from
NUMBER OF
RINGS
until
Description
STANDARD to FINE. Press
(NO) to select STANDARD.
Initial setting: NO (STANDARD)
This is used to set the number of rings on which the machine
answers calls when the reception mode is set to AUTO. Enter any
number from 2 to 5.
Initial setting: 4 rings.
Note: If you have turned on Distinctive Ring (page 39), the
machine will answer after 2 rings regardless of this setting.
Option Settings
2
Press , then
until the desired setting appears.
•
The option settings and print settings
are described in the tables below
and on the following pages
3
Enter a selection for the setting by
pressing the number keys as
explained in the table.
4
After entering a selection, the
subsequent option/print setting will
appear in the display. To exit the
STOP
settings, press
(YES) to select FINE, or
repeatedly
.
.
45