Table of Contents
Advertisement
Print Settings
LANGUAGE
SELECTION
DIAL TONE
DETECTION
KEY TONE
Print Settings
Make a selection for the displayed setting as explained below.
This is done in step 3 of the procedure on page 45.
Setting
RECEIVE
RATIO
48
This sets the language that appears in the display, reports, and
lists. Press
for English or
sound and the display will change to the selected language.
Initial setting: ENGLISH
Press
(YES) to have the machine verify the presence of a
dial tone on the line before automatic dialing. Press
turn this function off.
Note: If you select YES and find that the machine is unable to
dial, change the setting to NO.
Initial setting: NO
Press
(ON) to have the machine sound a beep each time a
key is pressed on the operation panel (this confirms that the key
has been correctly pressed). Press
beep sound.
Initial setting: ON
Description
Press
(AUTO) to have the machine automatically reduce the
size of received faxes to fit the size of the printing paper. This
ensures that the edges of a fax are not cut off. (Note: AUTO may
not operate if the received fax is too long, contains many fine
graphics or images, or is sent at high resolution. In this case, the
remainder of the fax will be printed on a second page.) Press
(100%) to have all faxes printed at full size (if a fax is too
long to fit on the paper, the remainder will be printed on a second
sheet; note that the cut-off point may occur in the middle of a line).
Initial setting: AUTO
for Spanish. A beep will
(OFF) to turn off the
(NO) to
Hide quick links:
Advertisement
Table of Contents
