Sharp UX-B800SE Operation Manual page 31

Using an auto-dial number to
send a fax
1
Load the document(s).
If desired, press
resolution and/or contrast.
2
Select the fax number using one of
the methods below:
•
Rapid Key Dialing: If the number is
stored in a Rapid Key, press the
Rapid Key.
•
Speed Dialing: If the number is
stored in a Speed Dial number, press
SPEED DIAL
and enter the Speed Dial
number with the number keys. Make
sure the correct destination appears
in the display (if not, press
then press
•
Search Dialing: Press
until the name or number of
the other party appears in the
display, and press
3
Dialing and transmission will take
place automatically.
•
To cancel transmission, press
•
If the transmission is completed
successfully, the machine will beep
once.
RESOLUTION/
RECEPTION MODE
to set the
STOP
), and
.
or
.
STOP
.
Sending a Fax: Auto Dialing
•
If an error occurs, the machine will
beep three times and print a
Transaction Report to inform you of
the problem (p. 51).
Making a voice call with an auto-dial
number
Rapid Key Dialing: Lift the handset
and press the Rapid Key.
Speed Dialing: Lift the handset, press
SPEED DIAL
, and enter the 2-digit Speed Dial
number with the number keys.
Search Dialing: Press
until the name or number of the other
party appears, and lift the handset.
(You can also lift the handset first,
search for the number, and then press
.)
or
29