Remote Operations; Remote Code Number - Sharp UX-460 Operation Manual

Remote Operations

Remote Operations
You can call the UX-460 from any touch-tone telephone and play back
your messages using the remote commands. You can also use these
commands to change the reception mode and other settings.

Remote code number

To perform remote operations, you must first program a remote code
number. This number is used to prevent unauthorized people from
listening to your messages or changing the settings of your machine.
The remote code number has been set to "001" at the factory. If you
want to change it, press the panel keys as shown below.
1
Press these keys:
The display will show:
2
Press these keys:
The display will show:
3
Enter a 3-digit number by pressing the
number keys.
4
Press the START/MEMORY key and
then the STOP key.
50
FUNCTION
T.A.D. SETTINGS
REMOTE CODE
0
2 2 2
(Example)
STOP
START/MEMORY