Sharp UX-460 Operation Manual page 116

Option Settings
Setting 7: TRANSACTION REPORT PRINT SELECT
This sets the condition for printing out a Transaction Report. Enter a
number from 1 to 5 as follows:
1 (ALWAYS PRINT): A report will be printed after each
2 (ERR/TIMER/MEM): A report will be printed after an error, timer
3 (SEND ONLY):
4 (NEVER PRINT):
5 (ERROR ONLY):
Initial setting: 5
FUNCTION
Enter a number
from 1 to 5
Setting 8: DIAL MODE
This sets the mode of dialing. Press 1 if you are on a touch-tone line, or
2 if you are on a pulse dial line. (If you don't know which type of line
you have, try making phone calls with both settings and see which one
works.)
Initial setting: 1
FUNCTION
TONE
1
114
transmission, reception, or error.
operation, or memory operation.
A report will be printed only after a
transmission.
A report will never be printed.
A report will be printed only after an error
occurs.
4
Press
DIAL MODE
4
Press
PULSE
or
2
DISTINCTIVE RING
until
display
TRANSACTION LIST
shows:
until
display
DIAL MODE
shows:
STOP
STOP