Sharp UX-460 Operation Manual page 37

3
Press the START/MEMORY key.
4
Press 1 to select GENERAL. (If you
are recording a message for the
Transfer function explained later in
this chapter, press 2 for TRANSFER.)
5
Pick up the handset, press the
START/MEMORY key, and speak
into the handset.
The outgoing message can be up to
60 seconds long. The outgoing
message for the Transfer function
can be up to 15 seconds long.
While recording, the display will
show the time remaining to record.
6
When finished, press the STOP key
and then replace the handset.
7
Press the STOP key to return to the
date and time display.
Recording an Outgoing Message
START/MEMORY
GENERAL TRANSFER
1 or
STOP
STOP
2
START/MEMORY
35