Sharp UX-460 Operation Manual page 53

Toll Saver
When you call the UX-460 to listen to your messages, it will answer
after two rings if it has received at least one message, or after four
rings if it has not received any messages.
This allows you to save money on telephone charges, particularly if
you are calling long distance. If the machine does not answer after the
second ring, you can simply hang up before it answers, saving
yourself the cost of that call.
If you do not want to use the Toll Saver function, you can turn it off
by following the steps below. In this case, the UX-460 will answer
after the number of rings set with Option Setting 2 (see Chapter 8), the
ring setting for FAX reception mode.
1
Press these keys:
The display will show:
2
Press these keys:
The display will show:
3
Press 1 to turn Toll Saver on, or 2 to
turn it off.
4
Press the STOP key.
FUNCTION
T.A.D. SETTINGS
TOLL SAVER
Remote Operations
0
2
1
or
STOP
51