Batch Page Numbering - Sharp UX-460 Operation Manual

Batch Page Numbering

Batch Page Numbering
You can change the page numbering of the transmitted document from
simple numbering ("P.01", "P.02", etc.) to batch numbering, which
means that a slash and the total number of pages being sent are added
after each page number (for example, "P. 01/05", "P.02/05", etc.). This
allows the receiver to check for missing pages.
1
Load the document(s).
The document must be loaded
before batch page numbering can be
set.
2
Press these keys:
The display will show:
PAGE COUNTER SET
3
Enter the total number of pages ("01"
to "99") by pressing the number keys.
If you are sending a cover sheet, do
not include it in the total number of
pages (the number will be adjusted
automatically).
4
Dial the receiving machine and
transmit the document.
100
FUNCTION
0
8
Example:
Eight pages