Bypass Copying On Standard Size Paper - Sharp AR-651 Operation Manual

4. BYPASS COPYING(cont.)

Bypass Copying on Standard Size Paper

1 perform steps 1 to 2 on pages 5-8, 5-9.
1
-Set the "OTHER" size key as necessary.
2
If the paper that has been set is a standard size other than LD,
LG, LT or ST, you will select the OTHER key in step 2. In this
case, you need to make the OTHER key recognize the same
size as the paper that has been set.
3
2 Press the key of the same type as the paper that has
been set.
-Non-standard size paper
4
5
6 3 If you set the paper other than plain paper, press
the MEDIA TYPE key.
7
8
4 After selecting the media type key corresponding
to the type of the paper that has been set, press the
9
SET key.
10
If you select the media type key not corresponding to the type
of the paper that has been set, it may cause a problem such
as a paper jam, significant image deterioration and etc.
11
Select other copy jobs as required.
5 Press the
12
5-10
USING THE SPECIAL FUNCTIONS
Page 5-12
START key.
Page 5-14