8. SETTING THE AUTOMATIC ENERGY SAVE MODE
This function allows the copier automatically to go into the energy saving mode (unnecessary electricity
1
is cut off at standby) if it is left inactive for a certain period of time.
-
ENERGY SAVER key
2
1
Press the
menu, and press the ENERGY SAVE key.
- If the desired function keys are not displayed, press the Next
3
key to change the menu screen.
4
5
2
Select the period of time (in minutes) on the display
allowed before the Automatic Energy Saving mode is
activated.
- The setting procedure finishes and the display returns to
6
the program menu screen.
- The default setting is '15 minutes'.
7
8
Clearing the Automatic Energy Saving Mode
Press the
up.
9
10
11
12
5-16
USING THE SPECIAL FUNCTIONS
Page 1-5
PROGRAM
key to enter the program
ENERGY SAVER or
START key on the control panel. The copier starts to warm itself