Manual Paper Selection - Sharp AR-651 Operation Manual

Manual Paper Selection

It may not be possible for the device to perform Automatic Paper Selection with highly transparent originals
such as OHP films and tracing paper, wholly dark originals or originals with dark borders, or irregular sized
originals such as newspapers and magazines. For these types of originals, use manual paper selection.
* When the desired size of paper is not set in any of the drawers, you can change the paper size of the
drawer ( Page 2-6) or use the sheet bypass copying (
1
Place paper in the drawer(s).
- When using this mode in bypass copying, be sure to specify
the paper size.
2 Place the original(s).
3
On the basic screen, press the drawer icon
representing the desired paper size.
- Or press the ZOOM··· key to enter the next screen, and
press the key of the desired paper size.
- OTHER key Page 5-14
Select other copy modes as required.
4 Press the START key.
Page2-4
Page 5-10, 5-11
Page 2-9
Page 5-8).
1
2
3
4
5
6
7
8
9
10
11
12
3-3