Sharp AR-651 Operation Manual page 156

5. ADDING STAPLES (OPTIONAL) (Cont.)
5 Pull out the seal holding the staples straight upward.
1
2
3
6
Return the staple cartridge to its original position.
- Insert the cartridge until it is caught by the claw and fixed
with a click sound.
4
7
Close the front cover of the finisher.
5
If the following message remains displayed, repeat the above
procedure from
6
Set staple cartridge
7
* Only when the saddle stitch finisher (AR-F12) is installed.
8
1
Open the lower cover of the saddle stitch finisher.
9
10
2
Slide out the saddle stitch unit carefully toward the
11
front.
12
7-22
WHEN THE GRAPHIC SYMBOLS FLASH ON THE TOUCH PANEL
to .
Saddle Stitch Unit