When Placing An Original On The Glass - Sharp AR-651 Operation Manual

3. SETTING ORIGINALS (Cont.)

When Placing an Original on the Glass

1
When using the non sorting and non staple mode, the paper exits face up.
1
Raising the reversing automatic document feeder,
place the original face down on the glass.
2
2 Align the original against the left inner corner of the
glass.
3
3 Lower the reversing automatic document feeder
slowly.
4
- When copying originals with high transparency, such as OHP
films and tracing paper, place a blank sheet of paper the
size of the original or larger over the original.
5
6
7
1
Raising the reversing automatic document feeder,
8
place the original in the direction as shown in the
illustration.
- When using the Book-Type Originals 2-sided Copies (
Page 3-8) or the Dual-Page (
9
the book original on the yellow indicator line.
2 Lower the reversing automatic document feeder
slowly.
10
- Do not try to force the reversing automatic document feeder
to fully close over a very thick original, such as a big book.
Copies can be made even if the cover or feeder does not
close fully.
11 - During copying, an intense light may leak out. Do not look
at the original glass surface.
12
2-10
HOW TO MAKE COPIES
Sheet Originals
Book-type Originals
Page 4-5) function, center
Original
Blank sheet
Original