Display Mode Screens - Baldor 22H series Installation & Operating Manual

Section 1
General Information
Display Mode Continued

Display Mode Screens

Action
Apply Power
Press DISP key
Press DISP key
Press DISP key
Press DISP key
Press DISP key
Press DISP key
Press DISP key
Press DISP key
4-4 Programming & Operation
Description
Display mode showing motor
speed.
Display mode showing custom
unit output rate.
Display Frequency
DIsplay Current
DIsplay Voltage
Combined DIsplay
Screen to enter Fault Log
Screen to enter Diagnostic Menu
Exit Display mode and return to
Motor Speed display
Display
Logo display for 5 seconds.
No faults present. Local keypad
mode. If in remote/serial mode,
press local for this display.
Output rate display will only
appear if Value At Speed
parameter is entered.
Comments
MN722