Hydraulic Clutch - Chevrolet Tracker 2003 Owner's Manual

How to Add Fluid
Here's how to add fluid. Refer to the Maintenance
Schedule to determine what kind of fluid to use. See
Part D: Recommended Fluids and Lubricants on
page 6-30 .
1. Remove the filler plug.
2. Remove the drain plug, drain the fluid and reinstall
the drain plug.
3. Add fluid at the filler plug hole. Add only enough
fluid to bring the fluid level up to the bottom of the
filler plug hole.
4. Reinstall the filler plug. Be sure the plug is fully
seated.

Hydraulic Clutch

It is not necessary to regularly check clutch fluid unless
you suspect there is a leak in the system. Adding
fluid won't correct a leak.
A fluid loss in this system could indicate a problem.
Have the system inspected and repaired.
When to Check and What to Use
Refer to the Maintenance Schedule to determine how
often you should check the fluid level in your clutch
master cylinder reservoir and for the proper fluid.
See Part B: Owner Checks and Services on page 6-24
and Part D: Recommended Fluids and Lubricants
on page 6-30 .
How to Check and Add Fluid
You do not need to check the fluid level unless you
suspect a clutch problem. To check the fluid level,
look at the markings on the reservoir. If the fluid reaches
the MAX line, the fluid level is correct.
5-27