Removing And Installing The Side Window - Chevrolet Tracker 2003 Owner's Manual

Removing and Installing the
Side Window
To remove the side window do the following:
1. Release the tension in the canvas top support
arms. Unfasten the hook and loop fastener
strips on the top and rear quarter of the side
window.
2. Unzip the zipper almost all the way, leaving about
3 inches (8 cm) of it still zipped and unfasten the
hook and loop fastener strips on the inside of
the window.
3. Release the plastic strip sewn along the bottom
edge of the window by gently pulling down and
out. Then release the plastic along the front edge of
the window by pulling it forward and out. It may
help to rock the window back and forth to remove it.
4. Unfasten the plastic clip, which is part of the canvas
top, at the top front corner of each side window.
Then unzip the zipper the rest of the way and
remove the side window.
2-41