Hydraulic Clutch - Chevrolet T-Series Owner's Manual

3. If the fluid level is good, reinstall the plug and
be sure it is fully seated. If the fluid level is
low, add more fluid as described in the
next steps. Refer to the Maintenance
Schedule to determine what kind of fluid to
use. See Part C: Recommended Fluids
and Lubricants on page 295.
How to Add Fluid
To add transmission fluid, do the following:
1. Remove the filler plug.
2. Add fluid at the filler plug hole. Add only
enough fluid to bring the fluid level up to
the bottom of the fill opening. Refer to
the Maintenance Schedule to determine the
proper fluid to use. See Part C:
Recommended Fluids and Lubricants on
page 295.
3. Reinstall the filler plug. Be sure the plug is
fully seated.

Hydraulic Clutch

It is not necessary to regularly check clutch fluid
unless you suspect there is a leak in the system.
Adding fluid will not correct a leak.
A fluid loss in this system could indicate a
problem. Have the system inspected and repaired.
When to Check and What to Use
Refer to the Maintenance Schedule to determine
how often you should check the fluid level in your
clutch master cylinder reservoir and for the proper
fluid. See Part B: Owner Checks and Services on
page 289 and Part C: Recommended Fluids and
Lubricants on page 295 for more information.
The hydraulic clutch
fluid reservoir is located
behind the front
panel on the driver's
side of the vehicle.
195