Replacing the Drum Cartridge
The machine displays a message when the amount remaining in the drum cartridge is low. Note that the print quality
may suffer if you continue printing without resolving this issue. You can check the amount remaining in the drum
cartridge on the display (
When a Message Appear(P. 448)
Procedure for Replacing the Drum Cartridge(P. 449)
When a Message Appear
The message that is displayed depends on the amount remaining in the drum cartridge. Depending on which
message is displayed, prepare a new drum cartridge (
with a new one (
Procedure for Replacing the Drum Cartridge(P. 449) ).
<Preparing a drum cartridge is recommended.>/<Preparing a drum cart. is
recommended.>
This message notifies you that the drum cartridge needs to be replaced soon. Make sure that you have a
replacement drum cartridge ready. Replace the drum cartridge if you see this message before you start to print
a large job.
When this message is displayed
●
When printing, you can continue printing the original.
Specify when this message is displayed
●
You can set any value as the percentage of the amount remaining in the drum cartridge that triggers
this message.
<Drum cart. end of lifetime. Replacement is recommended.>/<Drum cart. life end.
Replcmt. recommended.>
This message notifies you that the drum cartridge has reached the end of its lifetime. It is recommended that
you replace the drum cartridge with a new one. You can continue printing, but the print quality cannot be
guaranteed.
Maintenance
Checking the Remaining Amount of Consumables(P. 452) ).
<Displ. Timing for Cartridge Prep. Notif.>(P. 415)
Consumables(P. 461) ) or replace the current drum cartridge
448
2KUS-087