Setting Sounds
The machine produces sounds in a variety of situations, such as when fax sending is complete or when a paper jam or
error occurs. You can set the volume of each of these sounds individually.
1
Select <Menu> in the Home screen.
2
Select <Preferences>
3
Select a setting.
<Fax Tone>
<Ring Tone>
<TX Done Tone>
<RX Done Tone>
<Scanning Done Tone>
<Entry Tone>
<Invalid Entry Tone>
<Warning Tone>
<Job Done Tone>
<Energy Saver Alert>
<Original in Feeder Detection Tone> Sound produced when an original is loaded
4
Adjust the volume, and select <Apply>.
Basic Operations
<Volume Settings>.
Setting
Sound produced during a fax transmission
Sound produced when an incoming fax is
received
Sound produced when fax sending is
complete
Sound produced when fax receiving is
complete
Sound produced when fax original scanning
is complete
Confirmation sound each time a key on the
operation panel or button on the display is
pressed
Sound produced when an invalid key
operation is performed, such as when you
enter a number outside the valid setting
range
Sound produced when a paper jam or other
error occurs
Sound produced when an operation such as
copying or scanning is complete
Sound produced when the machine enters or
exits sleep mode
in the feeder
Home Screen(P. 111)
Description
155
2KUS-034
Action
Go to step 4.
Select <On> (produce a tone) or
<Off> (not produce a tone).