Parameters (functions) and instruction codes under different control methods
Instruction codes are used to read or write parameters through the Ethernet network (Modbus/TCP or CC-Link IE Field Network Basic).
(Refer to
page 39
for the details of the Modbus/TCP, and
Function availability under each control method is as follows:
: Available
: Not available
For "parameter copy", "parameter clear", and "all parameter clear", "" indicates the function is available, and "" indicates the function is not
available.
Communication parameters that are not cleared by Parameter clear (All parameter clear) through the Ethernet network (Modbus/TCP or CC-
Link IE Field Network Basic). (Refer to
Basic.)
Position control is enabled when an MM-CF IPM motor is used with the low-speed range high-torque characteristic enabled (Pr.788 Low speed
range torque characteristic selection = "9999" (initial value)).
FR-A800-E only
page 51
for the details of the CC-Link IE Field Network Basic.)
page 39
for the details of the Modbus/TCP, and
page 51
for the details of the CC-Link IE Field Network
SPECIFICATIONS
4
81