Prepare Your Machine For Sewing; Plug In The Machine And Switch On The Power; Foot Control Use - Kenmore OVERLOCK 3/4D 385.16631 Owner's Manual

SECTION
.
PREPARE YOUR MACHINE FOR SEWING
Foot Control Use
Power supply plug
supply
Plug
connector
Machine plug
Power
switch
NOTE: Before inserting the plug into your
machine, be sure the power switch is
OFF.
1.
2.
3.
Check your outlet to be sure it is a 110 to 120
Volt AC outlet.
Insert the machine plug into the three-prong
plug connector, as shown. It will only fit one
way.
Insert the power supply plug into the wall
outlet.
Power switch
4. Push the light and power switch to turn
on the power and sewing light.
SAFETY FEATU RE:
Your machine will not operate unless the
light/power switch is turned on. If you are
interrupted or stop sewing, turn off the
light/power switch to prevent injury to
children.
¢
/
Foot coR'_rol
The foot control regulates the speed at which
you sew.
To increase speed, gently press down with the
bail of your foot.
To decrease speed, release your foot pressure
slightly.
NOTE:
The foot control is sensitive and
will increase or decrease your
sewing speed immediately. Practice
on a scrap of fabric to regulate your
sewing speed to your taste and
needs.