Securing Ends; At The Beginning - Kenmore OVERLOCK 3/4D 385.16631 Owner's Manual

Toavoid unravelling, it isnecessary to leave a thread c hain about 5col (2")long atthebegmning and endofseam. Tosecure thebeginning and endofaseam choose
one ofthefollowing m ethods.
At theBeginning
A. Separa£e theena ofthreads and KnoT.
B. Thread t hechain through a large e ved needle, and weave t hatchain through t heoverrock stitches onthefabric.
C. Apply asmall amount ofseam sealant (Fray Check T Mor Fray-No-More TM!attheeage o fthefabric.Cutthechain attheeage o ffabric.
D. Backstitching
1. Before o uttmg yourfabric ;_themachine, sew athread c hain about 5 cm(2")long behind t heneedle
2. Putyour f abricqthemacnme. Then _ergeafewstitchesandstou.
3. Raise t hepresser footantbring thethread chain totneleftarouna a nn under t heoresser foot
4. Place t hethread c hain oetween thepresser foc[ ann upper k nifeholding I t innosition a s youlower t hepresser foottosew.
5. AftersewmgaDout2.5cm(l"),movethechairltotherlghtandunaertneupperknife cutting the chairasyousew
19