Basic Operation; About Settings - Audio Technica 3000 Series User Manual

Basic operation

1. Turn the receiver (ATW-R3210) power on.
• Display lights and the main screen appears.
2. Set the operating frequency.
3. Turn the transmitter (ATW-T3201/ATW-T3202) power on.
• The indicator lights and the main screen appears.
ATW-T3201
4. Check the RF level indicator.
• Check that antenna A or B lights up.
5. Speak into the mic.
• Make sure the AF level indicator lights up.
ATW-T3202

About settings

The various settings of this product can be made from the main menu.
ATW-R3201
1. Press the control dial.
• The main menu is displayed.
2. Turn the control dial to select the item you wish to set.
3. Pressing the control dial opens the settings menu of the selected
item.
• Press the BACK button to go back one screen.
• To cancel part way through making a setting, press the BACK button.
• While in the setting mode, the display will return to the main screen if 60
seconds pass without a button or the control dial being used.
ATW-T3201/ATW-T3202
1. Press the SET button.
• The main screen mode is displayed.
ATW-T3201
2. Press the UP/DOWN button to select the item you wish to set.
Selected menu item
3. Pressing the SET button opens the settings menu of the selected
item.
• Press the BACK button to go back one screen.
• To cancel part way through making a setting, press the BACK button.
• While in the setting mode, the display will return to the main screen if 30
seconds pass without a button or the control dial being used.
14
ATW-T3202
Current value