3000 series frequency-agile true diversity uhf wireless systems unipak transmitter system lavalier microphone system handheld dynamic microphone/condenser system headworn condenser microphone (black) system (2 pages)
600 series professional uhf wireless systems unipak system guitar system headworn microphone system lavalier microphone system handheld microphone system (11 pages)
Infrared wireless conference microphone system, conference microphone unit, dedicated microphone, master control unit, volting module, ir transmitter/receiver unit, conference manager extended system, distributor (56 pages)
Frequency-agile true diversity uhf wireless system (12 pages)
Summary of Contents for Audio Technica AT895
Page 1
AT895 Adaptive-array Microphone Systems New Technology Enhances Audio Acquisition Unique, groundbreaking optimization of acoustic, analog and digital design produces unmatched directional performance, operating versatility and ease of use. AT895/MK Mount Kit AT895/RK Remote Kit Installation and Operation...
Page 2
† Compared to typical performance of a professional-quality 15.5" line + gradient microphone (measurement conditions: 1Pa at 0.5 m). Due to the adaptive nature of its digital processing, AT895 performance in actual field conditions will vary with the environment encountered.
Page 3
AC adapter — via an industry-standard 4-pin XLR-type connection. The AT895 is available as the AT895/RK “Remote Kit” for field use, and as the AT895/MK “Mount Kit” for studio and fixed-install applications. AT895/RK Remote Kit includes: • AT895MIC Adaptive-array Microphone •...
Page 4
V– on Pin 1, V+ on Pin 4, no connection to Pins 2 or 3. 10. MIC INPUT JACK: 7-pin XLRM-type connector accepts the special AT895C 6-conductor shielded cable used to connect the AT895 Microphone to the Control Pack.
Page 5
Planar-adaptive mode. When the microphone is positioned with the Audio -Technica logos along the sides of the mic handle and the “AT895” on the name ring is “up” (as shown above and in Fig. A on page...
AT895/MK System). • From an Anton/Bauer or similar-type external 12-14V battery source. • From three 9V batteries in a click-on AT895BH Battery Housing (included in the AT895/RK System) for completely self-contained operation. AT895BH Battery Housing Battery Selection and Installation Always use fresh alkaline or lithium 9V batteries.
-16 threaded " metal insert in bottom of grip.) Shock-mount Stand Clamp with " threaded stud for mounting the AT895 on a microphone stand. Zeppelin-type windscreen reduces on-axis wind noise while protecting the microphone. Click-on Battery Housing holds three 9V bat- teries for self-contained AT895 operation.
Page 8
One-Year Limited Warranty Audio-Technica brand products purchased in the U.S.A. are warranted for one year from date of purchase by Audio-Technica U.S., Inc. ( A. T .U.S.) to be free of defects in materials and workmanship. In event of such defect, product will be repaired promptly without charge or, at our option, replaced with a new product of equal or superior value if delivered to A.