How to operate
Basic operation
1.
Turn on the main power button of the receiver
(ATW-R5220/ATW-R5220DAN).
2.
Turn on the power button of the receiver
(ATW-R5330/ATW-R5220DAN).
• The display lights and the main screen is displayed.
3.
Set the operating frequency.
4.
Turn on the power switch of the transmitter
(ATW-T5201/ATW-T5202).
• The indicator lights and the display shows the main screen.
ATW-T5201
5.
Set the transmission frequency.
6.
Check the RF level indicator on the receiver.
• Check that antenna A or B lights up.
7.
Speak into the microphone.
• Make sure the AF level indicator lights up on the receiver.
ATW-T5202
Using SYNC shortcut
You can easily move to the setting screen that you can set the settings
of the receiver with SYNC shortcut.
1.
Press and hold (for approximately 2 seconds) the control dial on
the main screen.
2.
"TX SYNC" setting screen is displayed.
• Refer to "Using IR SYNC" (p.p. 17) for subsequent steps.
14