Configure Logical Outputs - Honeywell Stryker VAV Operating Manual

STRYKER VAV ZIO CONFIGURATION
Display
0d10 0 to 10 volts (Wall Mod LED)
10d0 10 to 0 volts
2d10 2 to 10 volts
10d2 10 to 2 volts
0A20 0 to 20 ma
20A0 20 to 0 ma
0A22 0 to 22 ma
22A0 22 to 0 ma
4A20 4 to 20 ma
20A4 20 to 4 ma
dIG Binary output (0 and 10 vdc)
255-- none
CONFIGURE LOGICAL
OUTPUTS
Parameter Group Name
Configure Reheat Stage 1 [nciLogicalOutVav, HtgStg1]
63-2730—01
Description Display
AO_1 Analog output 1
AO_2
dO_1 Binary output 1
dO_2
dO_3
dO_4
-- None
NOTES:
1. If you select dO_1 or dO_2, verify that
Float_2_TRVL_SEC =0. This frees dO_1 & dO_2
from internal links to Float_2.
2. If you select dO_3 or dO_4, verify that
Float_1_TRVL_SEC =0. This frees dO_3 & dO_4
from internal links to Float_1.
Same settings as RH STG1
Same settings as RH STG1
Configure modulating reheat [nciLogicalOutVav, ReheatMod]
28
Description