Dimplex ECSd125-580 Installation And User Instructions Manual page 29

Direct Electric Cylinder Range – Product Features
Materials
- inner cylinder
- outer cylinder
- inlet/outlet
- insulation
Maximum operating conditions
- potable water temperature
- operating pressure
Cold water supply
- minimum dynamic pressure
- maximum pressure
- minimum flow rate
Connections
- cold water inlet
- hot water outlet
Immersion heater
Thermostatic control
- direct input
Safety components
- pressure reducing valve and strainer
- expansion relief valve
- temp. and pressure relief valve
- factory pressure test
Other features
Approvals
Guarantee
- inner cylinder
- immersion heaters
- other components
# Not including insulation
Duplex stainless steel LDX2101
HIPS
Stainless steel
60mm PU foam (GWP=1, ODP=0)
70°C
3 bar
1.5 bar
12 bar
15 l/min
22mm stainless steel
22mm stainless steel
1 ¾ F BSP 3kW
integral immersion heater thermostat and cut out
3 bar
6 bar
7 bar/90°C
12 bar
Over 60% in volume from recycled materials#
Surface mounted sensor devices for compatibility and
ease of maintenance
KIWA approval number:- 1112700
KIWA
KIWA
25 yrs
2 yrs - excluding the effects of lime scale or other water
borne contaminants
2 yrs - excluding expansion vessel membrane pressure
Table 7: Direct Electric Product features
Technical Data