Troubleshooting - DeLonghi ECAM23.46X Instructions For Use Manual

Bean to cup espresso and cappuccino machine
Table of Contents

Advertisement

20. TROUBLESHOOTING

Below is a list of some of the possible malfunctions.
If the problem cannot be resolved as described, contact Customer Services.
PROBLEM
The coffee is not hot.
The coffee is weak or not
creamy enough.
The coffee is delivered too
slowly or a drop at a time.
Coffee does not come out of
one or both of the spouts.
The milk does not come out of
the milk spout (D5)
The appliance does not come
on
The
infuser
cannot
extracted
POSSIBLE CAUSE
The cups were not preheated.
The internal circuits of the appliance have
cooled down because 2/3 minutes have
elapsed since the last coffee was made.
A low coffee temperature is set.
The coffee is ground too coarsely.
The coffee is unsuitable.
The coffee is ground too finely.
The coffee spouts (A14) are blocked.
The lid (D2) of the milk container lid is dirty
It is not plugged into the mains socket.
The main switch (A8) is not turned on.
be
The appliance has not been turned off correctly
remedy
Warm the cups by rinsing them with hot
water (Please note: you can use the hot water
function).
Before making coffee, rinse the internal circuits
by pressing the
Set a high coffee temperature in the menu.
Turn the grinding adjustment dial (A2) one
click anticlockwise towards 1 while the coffee
mill is in operation (fig. 10). Continue one click
at a time until coffee delivery is satisfactory.
The effect is only visible after delivering 2
coffees (see section "10.4 Adjusting the coffee
mill").
Use coffee beans suitable for espresso
machines.
Turn the grinding adjustment dial (A2) one
click clockwise towards 7 while the coffee mill
is in operation (fig. 11). Continue one click at
a time until coffee delivery is satisfactory. The
effect is only visible after delivering 2 coffees
(see section "10.4 Adjusting the coffee mill").
Clean the spouts with a toothpick (fig. 28B).
Clean the milk container lid as described in
section "14. Descaling".
Plug into the mains socket.
Place the main switch in the I position (fig. 2).
Turn the appliance off by pressing the
button (B39) (fig. 6) (see section "7. Turning
the appliance off").
23
button (B5).

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ecam24.46x

Table of Contents