Ioline CrystalPress Quick Start Manual page 7

Setup the CrystalPress Sorter Bowl
IMPORTANT NOTE: The Sorter Bowl instal-
lation steps listed below are included only
for reference. The CrystalPress machine is
shipped with two Sorter Wheels already in-
stalled in the Sorter Bowls. Use these steps
to change the Sorter Wheels if the crystal
size already installed in the machine is not
desired.
1
Rotate the Wiper Arm Clamp clockwise to unlock
the Wiper Arm.
2
Rotate the Wiper Arm up.
3
Install the Sorter Wheel on the shaft. Turn the
wheel until it drops into position. A small pin on
the sorter assembly fits into a single hole on the
bottom of the sorter wheel. Until the pin and
hole are aligned, the wheel will not seat properly
and the clamp .
4
Screw on the Sorter Wheel Thumbscrew.
5
Rotate the Wiper Arm down and turn the Wiper
Arm Clamp counter-clockwise to lock.
7