Customising Wash Cycles - Fisher & Paykel WashSmart Installation Instructions And User Manual

After using your washer a few times you may discover there are some wash options you prefer
for some cycles.
You can programme your washer to remember the wash options you prefer for each wash cycle.
For instance, you may want to set the EASY IRON cycle to cold wash temperature or set the
EVERYDAY cycle so it gives you Rinse+ every cycle.
To customise a cycle:
Press POWER to turn the machine on.
1
Turn the dial to select the cycle you wish to customise.
2
Touch and hold any of the wash option buttons for 3 seconds. The cycle icon will flash on and off
3
to indicate that the product is in cycle adjustment mode. The display will show "SEt".
Select the wash options you prefer by touching the relevant option button.
4
Touch KEYLOCK to save the selected settings.
5
Your washer will automatically remember your changes for all future washes you do on this cycle.
Factory Reset
You can reset your washer to the default settings it left the factory with:
Turn the dial to select SPIN
1
Touch and hold the DELAY START MORE
2
together for 3 seconds.
Your washer will now be reset to the default settings.
3

Customising wash cycles

, the DELAY START LESS and OPTIONS buttons
EN
25